Demo shows a MIPS uClinux kernel and some applications run on Xiptech simulator. Please do the following steps:

  1. download and uclinux.bin.tar.gz
  2. unzip to a your PC, for example, c:\xiptech
  3. change paths in shortcut if necessary, that means if your path is not c:\xiptech
  4. unzip uclinux.bin.tar.gz to your path
  5. double click the short cut and you will see linux booting information from a console
  6. telnet to 10001, and click enter key of your PC. You can see a linux shell.
  7. ls,free,ps..., try linux base shell commands on the telnet

See Also